How Can I Access a Data Logger Remotely?

Microedge data loggers can be accessed remotely through a network. The required setup depends on the data logger series.

SITE-LOG and iLOG Data Loggers

SITE-LOG and iLOG data loggers use USB communication. To access them over an Ethernet network, connect the logger to a Smart-Hub or Site USB Device Server.

1. Connect the Data Logger

Connect the data logger to a USB port on the Smart-Hub or Site USB Device Server.

2. Connect to the Network

Connect the Smart-Hub or Site USB Device Server to your Ethernet network.

3. Find the Device in SiteView

Open SiteView and select the:

USB Server

tab.

Click Search to find available Smart-Hub or Site USB Device Server connections on the local network.

Once the device is found, it will be added to the connection list.

4. Access the Data Logger

Double-click the Smart-Hub or Site USB Device Server connection.

The connected data logger or loggers will appear underneath it.

Double-click a logger icon to open its Status window.

For instructions on finding the IP address of a Site USB Device Server, refer to:

How Do I Find the IP Address of a Site USB Device Server?

https://microedgeinstruments.com/meifaq/?p=243

PRECISE-LOG WiFi Data Loggers

PRECISE-LOG data loggers have built-in WiFi capability and do not require a Smart-Hub or USB Device Server for network access.

Once the logger has joined your WiFi network, SiteView can communicate with it using the logger’s IP address.

In SiteView:

  1. Open the USB Server tab.
  2. Add a new connection.
  3. Enter the PRECISE-LOG logger’s IP address.
  4. Double-click the connection to communicate with the logger.

For detailed WiFi configuration instructions, refer to:

How to Configure WiFi Settings for a PRECISE-LOG Data Logger

https://microedgeinstruments.com/meifaq/?p=234

Accessing a Data Logger from Outside the Local Network

The methods above apply when SiteView and the data logger are reachable through the same local network.

If the SiteView computer is located outside that network, additional network configuration is required.

Two common methods are:

  • VPN – the remote computer connects securely to the logger’s network and then accesses the logger using its local IP address.
  • Port Forwarding – the network router forwards the required TCP port from the public IP address or domain name to the PRECISE-LOG logger, Smart-Hub, or Site USB Device Server.

For detailed instructions, refer to:

How to Communicate with a Data Logger Remotely over the Internet

https://microedgeinstruments.com/meifaq/?p=711