How Do I Start a New Logging Session?

 To start a new logging session in SiteView:

1. Open the Logger Configuration

Open the data logger’s Status window in SiteView.

Click:

Configure

The logger’s Configuration dialog will open.

2. Configure the Logging Session

Make any required changes to the logger settings, including:

  • Sampling Interval
  • Time to Start
  • Time to End
  • Enabled channels
  • Memory allocation or logging duration settings

If you want the logger to begin logging immediately, make sure Time to Start is not set to a future time.

3. Check the Available Memory

Make sure enough logger memory is available for the planned logging session.

The required memory depends mainly on:

  • The sampling interval
  • The number of enabled channels
  • The total logging duration

Faster sampling, more enabled channels, or a longer logging period will require more memory.

4. Start the New Logging Session

Click OK to save the configuration to the logger and start the new logging session according to the configured start time.

Important: Starting a new logging session clears the data previously stored in the logger. Download any data you need to keep before starting a new session.